As a high-tech art device in modern landscape engineering, laser fountains perfectly combine water, light and sound, adding unique charm to cities and scenic spots. However, its complex system structure requires regular maintenance to maintain the best effect. This article will introduce the key maintenance points of laser fountains to help users extend the life of the equipment and ensure safe operation.
{}} ᱫᱚ ᱱᱚᱣᱟ ᱨᱩᱠᱷᱤᱭᱟᱹ ᱜᱩᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱵᱮᱵᱷᱟᱨᱚᱜ ᱠᱟᱱᱟ ᱾
The water quality of laser fountains directly affects the life of the equipment and visual effects. It is recommended to test the pH value and turbidity of the water quality weekly and keep the pH value between 7.0-7.8. Regular use of professional water treatment agents can prevent scale deposition and algae growth. The filtration system needs to be checked daily to ensure that there is no blockage and to avoid damage to the water pump due to ᱰᱤᱯᱷᱚᱞᱴ ᱯᱮᱨᱟᱢᱤᱴᱟᱨ ᱠᱚ=᱓}᱾
{} } ᱥᱤᱥᱴᱚᱢ ᱚᱯᱴᱤᱢᱟᱭᱤᱡᱽᱰ ᱚᱯᱴᱤᱢᱟᱭᱡᱮᱥᱚᱱ ᱾
The laser generator is the core component, and technicians need to calibrate the optical path and clean the optical components every quarter. In daily use, avoid direct light to the lens, and close the waterproof cover in time on rainy days. If the beam is found to be weakened or scattered, it may be a signal of laser tube aging, which needs to be replaced in time to avoid safety hazards.
{} } } ᱟᱨ ᱨᱤᱢᱚᱴ ᱨᱤᱢᱚᱴ ᱨᱤᱥᱚᱨᱥ ᱨᱤᱜᱽᱨᱮᱥᱚᱱ ᱥᱟᱫᱷᱚᱱ ᱾
Food-grade lubricants should be added to moving parts such as nozzles and water pumps every month to prevent rust and wear. In low-temperature areas in winter, the pipes should be drained to prevent freezing and cracking. It is recommended to replace the grease of the motor bearings once a year to ensure smooth operation.
{0} ᱫᱚ ᱵᱟᱝ ᱵᱟᱰᱟᱭ ᱟᱠᱟᱱᱟ ᱡᱮ ᱱᱳᱰ ᱠᱚ ᱫᱚ ᱵᱟᱝ ᱨᱩᱠᱷᱤᱭᱟᱹ ᱜᱮᱭᱟ ᱾
All electrical connection points should be tightened every six months and the joints should be wrapped with waterproof tape. The ground resistance needs to be tested regularly to ensure that it is less than 4 ohms. After heavy rain, it is necessary to check whether the distribution box has water ingress. If a problem is found, it should be immediately powered off for inspection.
{} } } ᱜᱟᱹᱦᱤᱨ ᱨᱩᱠᱷᱤᱭᱟᱹ ᱞᱟᱹᱜᱤᱫ ᱾
Before deactivation each year, it should be thoroughly cleaned, including water tanks, pipes and laser equipment. During long-term deactivation, it is recommended to power on and run for 10 minutes each month to prevent the circuit from getting damp. Before reactivation, the system pressure and laser power need to be fully tested.
Standardized maintenance can not only improve the viewing effect of the laser fountain, but also avoid economic losses caused by sudden failures. It is recommended that users establish a detailed maintenance log to record the content of each maintenance and the replacement of parts information to provide data support for long-term stable operation.
