2019 ᱨᱮ, ᱟᱨ ᱢᱤᱫ ᱞᱮᱠᱟᱱ ᱩᱫᱽᱭᱚᱜᱽ ᱠᱚ ᱫᱚ ᱢᱤᱫ ᱞᱮᱠᱟᱱ, ᱟᱨ ᱢᱤᱫ ᱞᱮᱠᱟᱱ, ᱟᱨ ᱮᱴᱟᱜ ᱠᱚ ᱫᱚ ᱵᱟᱝ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱛᱮ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱟᱹᱰᱤ ᱵᱮᱥ ᱧᱮᱞᱚᱜ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱥᱟᱱᱟᱢ ᱠᱷᱚᱱ ᱵᱮᱥ ᱞᱮᱠᱟ ᱧᱮᱞᱚᱜ ᱠᱟᱱᱟ.
First, water quality management is the core of fountain care. The fountain water body is exposed to the outside for a long time and is easily affected by pollutants such as dust, fallen leaves, and algae. Regularly cleaning debris in the pool, such as leaves, plastic bottles, etc., is the basic work to keep the water clean. In addition, a filtration system should be installed and the filter screen should be replaced regularly to prevent impurities from entering the circulation system. For the problem of algae breeding, an appropriate amount of environmentally friendly algaecide can be added, and the pH value of the water body should be controlled within an appropriate range, usually maintained between 7.0-7.8.
Secondly, the maintenance of fountain equipment is crucial. Water pumps, nozzles, pipes and other components need to be checked regularly to ensure that there is no blockage, wear or leakage. As the power source of the fountain, the water pump should be lubricated and the water inlet cleaned regularly to prevent debris from entering and causing damage. After long-term use, the nozzle may be blocked or the angle may be offset. It needs to be cleaned regularly and the spray direction adjusted to ensure the water type effect. The pipeline system needs to be checked for leakage or rust, and replaced or anti-corrosion treatment should be carried out if necessary.
The safety inspection of the electrical system should also not be ignored. The music fountain relies on electricity to drive, so it is necessary to regularly check the circuit, control cabinet and waterproof measures to ensure that there is no risk of aging, short circuit or leakage. Especially in the rainy season or humid environment, insulation protection should be strengthened to avoid safety accidents.
Finally, winter maintenance is the focus of fountain management in northern regions. When the temperature is below zero, the water in the pool may freeze and expand, causing equipment damage. Therefore, it is necessary to empty the pool before the winter comes, and antifreeze protection should be carried out on key components such as water pumps, or covering and insulation measures should be taken.
https://microssions officialize ar ko, official official official official official official official official official official official makate ar kạmi lạgit̕, ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱛᱟᱦᱮᱱ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱛᱟᱦᱮᱱ ᱠᱟᱱᱟ.
